The Dana 44 rear axle was available in a certain solid construction only some time ago. These days however, it has been reconfigured to work as an independent front suspension. The process of upgrading the Dana 44 rear axle for an intense road usage is quite simple. Furthermore, the after sales support for this axle is very strong and reliable. You could also get the parts for this axle by simply making a phone call. This could be done very easily by indeed properly identifying the right model that you are using.

Any of the cars or Jeeps that has bigger stock tires must be able to allow for the average person to fit in below so that you will be able to identify the axle. These processes should help you in identifying the Dana 44 rear axle. You could start by chocking the wheels of the rear making sure that the wheel chocks are sapping the weight of the vehicle. This should be done before even raising the front end. Thereafter you have to raise the vehicle with the floor jack thereby making use of the factory centre frame pad. There is also the need to raise the vehicle so that it fits the underneath in order to prevent the lifting of the wheels.

Moreover, there has to be an insertion of the jack stands on the factory pads on both the passenger and driver side of the frame rails. Then clean off the centre of the axle section by using a carburettor cleaner and a rag when needed. In locating the Dana 44 rear axle, the metal axle ratio tag is found on the lower passenger side of the middle portion. This portion is just under the axle tube which attached and visible at the front of the motor vehicle. In addition, the axle's model number is also engrossed on the axle web which is triangular. Also the date of manufacture is engrossed on the front of the long tube just 5 inches from where it connects.

Always ensure that you make contact with the original customer service at place of purchase because there are a number of combinations of parts which can be used. Note that the best way to identify a product is by establishing contact with the manufacturer. You could use internet forums and reviews given by other customers.